Temporarily Closed For Website Revamp. We Will Reopen in 30 Days.
Clearance!
Fender Bibs
Click on any image to enlarge
Fender Bibs

Fender Bibs

Sorry for the inconvenience, but this item is temporarily out of stock.

  • Specifications: For Use With No Mounting Plate, No Studs, Bleed Knot Concho, Edge Piping, Mounting Hole, 16 1/2" long, 5 3/4" wide
  • Only 1 left! When it's gone it's gone!
  • 5 3/4 inches wide (non-standard size)
  • 8 oz thickness Durable Leather
  • Sewn with Rot-proof Saddle Thread
  • Plain, No Studs
  • Bleed Knot Concho
  • Edge Piping
  • Mounting Hole
  • Made in our own Colorado leather shop
  • Handcrafted in Colorado!
  • Click for more info

This item is on clearance. Quantities are limited. The price is so low that this item is offered for final sale. No refund, no warrantee and we'll exchange for size only as inventory levels permit.

Our handcrafted heavy leather fender bibs will not only make that bare backend look hot, but also protect it from getting scratched, marred, and dented.

Order the Length That's Right For You

All of our premium leather rear fender bibs are approximately 6-inches wide, but you decide how long you need it to be. Typically, the rear fender bib should be long enough so that the end of it disappears beneath the seat. When deciding on the length, it's a good idea to factor that in. We recommend measuring from the passenger pillion mounting bolt (usually on the rearward end of where the pillion sat on the fender) to where the end will disappear completely beneath the rider seat. Once you have that measurement, add 1-inch to it. That's how long your fender bib should be.

How to mount our Handcrafted Rear Fender Bib

We include a mounting hole on the rounded end to enable you to use your passenger pillion mounting bolt to secure the fender bib to the fender. We sew Velcro on the end that goes beneath the seat and include an adhesive Velcro strip that will help secure the fender bib on that end.

Original Price $91.95
$64.35
On Sale!
You save over 30%

This item is handcrafted in our Colorado leather shop!

This product is on clearance and is not eligible for any additional discounts or promotional codes.

A Closer Look at Chilhowee Fender Bibs

Here's why Chilhowee handcrafted leather Fender Bibs are the finest quality available:

  1. We start by selecting our hides by hand. That means we pay close attention to each hide and handpick the best leather for the job - and only the finest cuts are used.
  2. Then Chilhowee artisans cut out the fender bib template from durable 8 oz full grain, specially tanned Cow hide.
  3. Next, we select a layer of butter-soft pigseude(flesh-side down) and sew it to the underside of the fender bib / tank panel to protect the finish of your fender using rot-proof stitching.
  4. Finally, your fender bib is treated with Buffalo Butter Advanced Leather Conditioner and 303 Anti-fade Protectant to give your motorcycle leather product a great start at a long life!

Click Here To Go Back To The Top

We make every effort to display accurate product images. Sometimes, however, the actual product may vary slightly from what is shown.

Don't Hesitate to Call
Please call us at 877-223-1602 if you have any questions or want more information.

Our Ironclad Guarantee
We want your total experience with Chilhowee to be GREAT! And so we back up every sale with a 100% No Hassle Guarantee. If you're not satisfied with any of our products for any reason, we will make it right or gladly refund your money.

Check out our Customer Reviews
Quality workmanship and unsurpassed customer service and satisfaction are big priorities for us. We're proud of the great testimonials we get from our customers, and we're committed to maintaining the product quality and the service that our customers say sets us apart from other companies. Click here to read customer reviews.

Follow us on Faceback Follow us on Twitter

View Cart | Checkout | My Account | Contact Us | About Us | Ironclad Guarantee
Customer Reviews | FAQuestions | Free Newsletter | Sitemap | Privacy Policy

Chilhowee Motorcycle Leather • Sales & Service 877-223-1602 • customercare@chilhowee.net
© Copyright 2001-2018 Chilhowee Motorcycle Leather

Frequently Asked Questions