Indian Fender Bibs

Order by Phone (877) 223-1602

About Us | Customer Care | Contact Us | Shopping Cart | Customer Reviews

(Suzuki Boulevard Pictured)

Indian Fender Bibs

8 oz Premium Leather
Withstands Oil, Dirt, Grime, And Water
Made from BLACK Leather
Sewn with Rot-proof Saddle Thread
Chrome Studs that won’t rust

Optional Conchos and Hand Laced Edges
Made in Oregon, USA
Satisfaction Guaranteed!
Click for more info

There are lots of reasons why riders install bibs on their rear fenders, and the most common is that it simply makes that naked rear fender look better. If you have no passenger pillion, a Chilhowee fender bib will not only make that bare backend look hot, but also protect it from becoming scratched, marred, and dented.

You've probably seen a few bikes with cheap vinyl fender bibs and wondered why someone would use vinyl to cover their good-looking ride, rather than a leather one. We wondered the same thing and began to look around for quality leather fender bibs. We discovered that there just wasn't much out there that we'd want to put on our bikes, so we designed our own. And now we have the finest quality, eye-catching, head turning leather fender bibs you can find anywhere! Satisfaction Guaranteed!

$55.00
Year
Model
Studs
Cross-Laced Center
Edge
Concho
We are currently shipping this item within 7-10 business days. Products shown as available are normally stocked but inventory levels cannot be guaranteed. This item is handcrafted in our Oregon leather shop!

A Closer Look at Chilhowee Fender Bibs

Here's why Chilhowee handcrafted leather Fender Bibs are the finest quality available:

We start by selecting our hides by hand. That means we pay close attention to each hide and handpick the best leather for the job - and only the finest cuts are used.
Then Chilhowee artisans cut out the fender bib template for your specific brand and model from durable 8 oz full grain, specially tanned Buffalo hide.
If you order studs, we mark the fender bib for them (1 ¼-inch centers) and then hand-mount the finest quality studs available, guaranteed not to rust or discolor. You decide if you want studs!
Now a premium quality concho, if that's on your option list, is positioned on the leather and installed. You pick out which concho or none at all!
Next, we select a layer of butter-soft cowhide (flesh-side down) and sew it to the underside of the fender bib / tank panel to protect the finish of your fender using rot-proof stitching. If you select edge piping, it is sewn between the two layers of leather at this stage.
If you opt for the hand-laced edges (our favorite), we mark the fender bib for the locations of holes (1-inch centers), and punch each hole by hand. Using 1/8-inch full grain leather lacing, the outside edges of the fender bib are laced by hand to complete the look. You decide what kind of edging!
Finally, your fender bib is treated with Buffalo Butter Advanced Leather Conditioner and 303 Anti-fade Protectant to give your motorcycle leather product a great start at a long life!

Click Here To Go Back To The Top

We make every effort to display accurate product images. Sometimes, however, the actual product may vary slightly from what is shown.

Don't Hesitate to Call
Please call us toll free at 877-223-1602 if you have any questions or want more information.

Our Ironclad Guarantee
We want your total experience with Chilhowee to be GREAT! And so we back up every sale with a 100% No Hassle Guarantee. If you're not satisfied with any of our products for any reason, we will make it right or gladly refund your money.

Check out our Customer Reviews
Quality workmanship and unsurpassed customer service and satisfaction are big priorities for us. We're proud of the great testimonials we get from our customers, and we're committed to maintaining the product quality and the service that our customers say sets us apart from other companies. Click here to read customer reviews.

Chilhowee Gift Certificates

Make Great Gifts!